P6200083 Medium Resolution
Low
|
High
Resolution
Use soap or spit to lubricate the inside of your long hoses. Connect your 5/16" tube to connections S1 & S2. Connect your 1/2" tube to connections L1 and L2. Tighten all clamps, and reattach your engine cover. I put a red arrow pointing at a grey rubber pipe. Don't forget to reconnect this. You are now done! Your installation should look like this. |
Previous
---
Index
---
Next
Previous
---
Index
---
Next
Picture info:
Date: 2003-03-23 14:32:53
Camera: OLYMPUS OPTICAL CO.,LTD C2100UZ
Focal Length: 38mm
Shutter: 1/60s
F/2.8
ISO: 100
No flash used