P6200067 High Resolution
Low    |    Medium
Resolution

Okay, some pseudo assembly. Do the following steps to get to this picture.
1) Lube up the inside of the bypass valve with some soapy water so the tube slides on easier.
2) Take the 'bottom' part of the tube, and lower it down through the hole. There is a red flat U thing will you will screw in and that part stays above the hole.

Previous --- Index --- Next

Previous --- Index --- Next

Picture info:
Date: 2001-06-20 19:42:54   Camera: OLYMPUS OPTICAL CO.,LTD C2020Z
Focal Length: 35mm   Shutter: 1/60s   F/2   ISO: 100   No flash used